Basic technical parameters of the MGX-70 head
Type of detected medium |
explosive , toxic gases and oxygen |
Measuring range |
According to the sensors spec. |
Measurement resolution |
According to the sensors spec. |
Reaction time (response) |
According to the sensors spec. |
Measurement type |
Diffusion |
Measurement start time |
≤30 sec. |
Rated power supply parameters |
12-30VDC |
Maximum power supply voltage range |
0,5 – 1W (depending on the sensor type) |
Output signal |
Digital |
Indicators (front panel) |
LEDs (operate,alarm,breakdown) |
Head operation mode |
Continuous |
Casing material |
Aluminium |
Explosion proof version mark |
II 2G Ex d IIC T6 II 2D Ex tD A21 IP 65 T70 C |
Protection classification - casing |
IP65 |
Working temperature range |
-25 – +55°C |
Humidity range |
15 – 95%Rh (no condensation) |
Dimension |
174x167x110mm |
Weight |
~1,4 kg |
Basic technical parameters of the GDX-70 head
Type of detected medium |
explosive , toxic gases and oxygen |
Measuring range |
According to the sensors spec. |
Measurement resolution |
According to the sensors spec. |
Reaction time (response) |
According to the sensors spec. |
Measurement type |
Diffusion |
Measurement start time |
≤30 sec. |
Rated power supply parameters |
12-30VDC |
Maximum power supply voltage range |
0,5 – 1W (depending on the sensor type) |
Output signal |
Digital |
Indicators (front panel) |
LEDs (operate,alarm,breakdown) |
Head operation mode |
Continuous |
Casing material |
PS |
Explosion proof version mark |
NONE |
Protection classification - casing |
IP65 |
Working temperature range |
-25 – +40°C |
Humidity range |
15 – 95%Rh (no condensation) |
Dimension |
138x158x53mm |
Weight |
~ 300 g |
USE:
-
collaboration with SDO and MSMR-16 units
-
detection and monitoring of explosive and toxic gas concentrations, oxygen loss, ( VOC ) .
-
ability to use in zones 1 & 2 and 21 & 22 (MGX-70)